| Model | GD-12 YD-1 | GD-18 YD-6 | GD-24 YD-8 |
| Capacity(500ml/can/min) | 15-40 | 40-60 | 60-80 |
| Power(kw) | 0.55 | 0.75 | 0.87 |
| Overall dimensions(mm) | 810*800*1100 | 930*1050*1550 | 1800*1050*1750 |
| Weight(kg) | 480 | 550 | 650 |
| Model | GD12-4 | GD18-4 | GD24-6 | GD30-6 |
| Capacity (500ml/can/min) | 80-120 | 120-150 | 150-250 | 240-300 |
| Can apply to high(mm) |
65-190mm(Special height can be customized) |
|||
| Filling temperature | 0-4ºC | |||
| Motor power(kw) | 5.5 | 6.5 | 7.8 | 8.5 |
| Overall dimensions(mm) | 2800*1600*2000 | 3000*1700*2000 | 3200*1800*2000 | 3500*1950*2000 |
| Wight(kg) | 3000 | 4000 | 4800 | 5200 |
1. Filling part
Mainly consist of supporting parts, protuberant wheel, main liquid pipe component, cylinder part, filling machine pipe, elevator-cylinder, filling valve, controlling ring parts, four directions distributor and down distributor, etc. It is mainly used to filling the materials into the bottle. The spare parts touching materials are all made of stainless steel material and special material, they are up to the food security requirements. When a bottle is lifted to a valve by elevator-cylinder, the inspection device will find the bottle. The air valve will open after receive the bottle signal, CO2 pipes begin to connect until the air pressure is same both in the bottle and the cylinder, then starts filling, the materials filled in the bottle exhausts the CO2 which is back to the cylinder through pipes. When the lifting liquid level seals the pipe and the pressure in the bottle is larger than that in the cylinder, the filling stops. After filling, the off valve will shut the filling machine. The CO2 stored in bottle neck then will be exhausted slowly through exhausting protuberant wheel. (exhausting must be slow, otherwise bubbles will appear.)
2.Sealing part
and capping system, electromagnetic capping heads, with burden discharge function, make sure minimum bottle crash during capping . All 304/316 stainless steel construction .No bottle no capping.
Automatic stop when lack of bottle
1.Can Depalletizer
It can replace the manual can arrangement,increase production efficiency ,it is an indispensable ideal device for middle and large sized beverage plants ,plc programmable computer automatic controller ,photo-electricity switch,over travel-limit switch and pneumatic control ,etc ,use the famous brand from germany and japan and taiwan
2. Can rising machine
Inline can washing machine ,it will invert the can and rinsing the water ,the water can be recycled to save the water usage by the water collect .Use the famous brand from germany and japan and taiwan
3.CARBONATED SOFT DRINK PRE-PROCESS SYSTEM
1 - High-shear emulsifying tank + Plate heat ex-changer
2 - Mixing tank
3 - Carbonated soft drink mixer+Refrigeration unit
4 - CIP cleaning system
4. PE FILM SHRINK WRAPPING PACKAGE MACHINE
Optional Equipment:
1) PE film shrink wrapping package machine
2) Half-Tray carton Shrink wrapping package machine
3) Carton package machine
